FREE SHIPPING ON ORDERS OF $500 OR MORE

THERE IS A $10 FLAT SHIPPING FEE FOR ANY ORDER UNDER $500

ASSAULT JOYSTICK CONTROLLER PROJECT BLOG

 

ASSAULT JOYSTICK CONTROLLER AND SPARE PARTS

 

Centering Plunger

Brand new plunger used in the upper housing assembly for centering of the joystick handle.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  This part is used on many different joysticks made by Atari.  Refer to the part number below to determine if it will function in your device.   If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM Assault controllers.

Part #:  039712-01

$15
Pivot Ball

Brand new pivot ball used in the upper housing assembly for pivoting of the joystick handle.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  This part is used on many different joysticks made by Atari.  Refer to the part number below to determine if it will function in your device.   If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM Assault controllers.

Part #:  039716-01

$15
Logo Stick Rebuild Kit (Hall Effect, Logo, Assault, etc)

Brand new pivot ball and centering plunger used in the upper housing assembly for pivoting/centering of the joystick handle.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  These parts are used on many different joysticks made by Atari.  If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM Assault controllers.

$20
Actuator

Brand new actuator used in the lower assembly for engaging the switches.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  This part is used on many different joysticks made by Atari.  Refer to the part number below to determine if it will function in your device.   If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM Assault controllers.

Part #:  039714-01

$15  
Assault Cabinet Wide T-Molding

Wide 1.5" t-molding for Assault cabinets.  This is an exact reproduction made from the same plastic material and the same "profile" as the original 1.5" t-molding that Atari originally used.  We used the original Atari plastic extrusion die tooling to manufacture this part.  This is a drop in replacement which is 100% compatible with both reproduction cabinet and OEM cabinet.  Note:  Price includes enough material for the entire base pedestal.

$50
/td>
Nyogel 779ZC Damping Grease (10gm tube)

Special silica-thickened, light viscosity, synthetic hydrocarbon grease intended for mechanical components that require a light level of damping (noise/chatter reduction).  This is the exact grease called out in Atari specifications with an added moly lubricant for better aluminum on aluminum lubrication.  It also has an added benefit of quieting down plastic gears!  Comes in a 10 gram tube - enough for several applications.

$15

 

[Home]  [About]  [Products]  [BLOGs]  [Wanted]  [FAQ]  [Vendors]  [Order]  [Links]  [Contact]