FOOD FIGHT and RED BARON ANALOG GIMBAL JOYSTICK AND SPARE PARTS

Mounts onto mounting plate for up/down/left/right movement.  An extreme improvement to the original Allen-Bradley potentiometers used by Atari, these are absolutely top notch parts!  Meets or exceeds Military specification MIL-R-94 and has a rotational life of 1,000,000 cycles.  The smooth response and tracking from this part is simply amazing!  Replace those worn pots!  Price is for two pots with mounting nuts.

Shaft + Knob assembly.  Shaft machined from cold rolled steel, heavy chrome plated and polished to a mirror-like finish.  Knob machined from a custom made phenolic-like material, precision ground and polished to a high gloss.  This knob is absolutely perfect in every way.  This component is made within original Atari tolerance specification and is fully compatible with original controllers as well as the reproduction controller. 

Machined from cold rolled steel, heavy chrome plated and polished to a mirror-like finish.  The decorative chrome plating is done by the same vendor that does Harley Davidson chroming.  This component is made within original Atari tolerance specification and is fully compatible with original controllers as well as the reproduction controller.

Replaces part number 038842-01

Machined from D.O.M (drawn over mandrel) steel, heavy chrome plated and polished to a mirror-like finish.  The decorative chrome plating is done by the same vendor that does Harley Davidson chroming.  This component is made within original Atari tolerance specification and is fully compatible with original controllers as well as the reproduction controller.

Replaces part number 036961-01

Replaces Atari SPDT momentary pushbutton switch with black cap Part #62-041.  Mounts inside of Red Baron controller handle.

Brand new NOS part.  Never been used, never installed, perfect condition.

Precision machined from 6061 aluminum, this is a highly upgraded component.  It will withstand much more abuse than the OEM counterpart.  It has been modified from the original part to provide excellent mechanical properties.  It is fully compatible with original controllers and the reproduction controller.  Note:  this part is also 100% compatible for use on Peter Pack Rat controllers and Battlezone controllers.

Replaces part number 036276-01

Machined from Nylatron material and precision ground, this is a highly upgraded component.  It will withstand much more abuse than the OEM counterpart.  It has been modified from the original part to provide excellent mechanical properties.  It is fully compatible with original controllers and the reproduction controller

Replaces part number 036279-03 (036279-01 & 036279-02)

Precision cut and lathed inner and outer 6061 aluminum rings.  The elastomer is a specially formulated polyurethane mixture which gives the same amount of "stiffness" as the original rubber counterpart. These reproduction centering bellows comply to original form, fit and function on every level, plus the use of polyurethane material offers a serious upgrade and far exceeds the original Atari specification. The tear strength on polyurethane is immense compared to rubber.  These feel *exactly* right when installed - not too stiff & not sloppy. They're absolutely perfect!

Replaces part number A037853-01

Machined from 6061 aluminum, TIG welded, ground and hard black anodized, this extremely upgraded part will withstand much more abuse than the OEM counterpart.  Made within original Atari tolerance specification, this part is fully compatible with original controllers as well as the reproduction controller.

Replaces part number 036954-01

Machined from Delrin material, this is an upgraded component.  It will withstand much more abuse than the OEM counterpart.  It has been modified from the original part to provide excellent mechanical properties and a much better fit than the original part.  It is fully compatible with original controllers and the reproduction controller. 

Replaces part number 036953-01

Machined from Delrin material, this is an upgraded component.  It will withstand much more abuse than the OEM counterpart.  It has been modified from the original part to provide excellent mechanical properties.  It is fully compatible with original controllers and the reproduction controller. Note: price includes TWO pieces.

Replaces part number 036952-01

Machined from Delrin material, this is an upgraded component.  It will withstand much more abuse than the OEM counterpart.  It has been modified from the original part to provide excellent mechanical properties.  It is fully compatible with original controllers and the reproduction controller.

Replaces part number 036955-01

Laser cut and machined from 6061 aluminum, precision formed and hard black anodized, this is a highly upgraded part which is designed to withstand extreme abuse.  Made within original Atari tolerance specification, this part is fully compatible with original controllers as well as the reproduction controller. 

Replaces part number 036958-02

Laser cut and machined from 6061 aluminum, precision formed and hard black anodized, this is a highly upgraded part which is designed to withstand extreme abuse.  Made within original Atari tolerance specification, this part is fully compatible with original controllers as well as the reproduction controller. 

Replaces part number 036958-01

Machined from 6061 aluminum and hard black anodized, this is a highly upgraded part which is designed to withstand extreme abuse.  Made to far exceed original standards, it is still within original Atari tolerance specification and is fully compatible with original controllers as well as the reproduction controller.  Note: price includes TWO pieces.

Replaces part number 036957-01

Brand new reproduction control panel wire harness for Food Fight arcade game.  This is the control panel wire harness only - connects to the gimbal joystick, two start buttons and two fire/throw buttons.

Replaces part number A039911-01

[Home]  [About]  [Products]  [BLOGs]  [Wanted]  [FAQ]  [Vendors]  [Order]  [Links]  [Contact]