"LOGO" JOYSTICK CONTROLLER AND SPARE PARTS

Brand new plunger used in the upper housing assembly for centering of the joystick handle.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  This part is used on many different joysticks made by Atari.  Refer to the part number below to determine if it will function in your device.   If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM hall effect controllers.

Part #:  039712-01

Brand new pivot ball used in the upper housing assembly for pivoting of the joystick handle.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  This part is used on many different joysticks made by Atari.  Refer to the part number below to determine if it will function in your device.   If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM hall effect controllers.

Part #:  039716-01

Brand new actuator ball used on the lower part of the shaft for engagement with the actuator.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  This part is used on many different joysticks made by Atari.  Refer to the part number below to determine if it will function in your device.   If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM Assault controllers.

Part #:  040693-01 & others

Brand new pivot ball and centering plunger used in the upper housing assembly for pivoting/centering of the joystick handle.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  These parts are used on many different joysticks made by Atari.  If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM hall effect controllers.

Brand new actuator used in the lower assembly for engaging the switches.  Made from Acetal Homopolymer (Delrin) within original Atari specification, using manufacturing information retrieved from tape and compared with NOS counterparts.  This part is used on many different joysticks made by Atari.  Refer to the part number below to determine if it will function in your device.   If you have a loose stick, use this part to correct the problem.  This part is 100% interchangeable with OEM Assault controllers.

Part #:  039714-01

Precision laser cut from 0.062" thick ABS material with a "haircell" texture on one side, this is an identical replacement for the original dust disc.  It is fully compatible with original controllers as well as the reproduction controller.

Part #:  039713-01

Special silica-thickened, light viscosity, synthetic hydrocarbon grease intended for mechanical components that require a light level of damping (noise/chatter reduction).  This is the exact grease called out in Atari specifications with an added moly lubricant for better aluminum on aluminum lubrication.  It also has an added benefit of quieting down plastic gears!  Comes in a 10 gram tube - enough for several applications.

Atari Part #: 178027-001

[Home]  [About]  [Products]  [BLOGs]  [Wanted]  [FAQ]  [Vendors]  [Order]  [Links]  [Contact]