FREE SHIPPING ON ORDERS OF $500 OR MORE

THERE IS A $10 FLAT SHIPPING FEE FOR ANY ORDER UNDER $500

>> MAJOR HAVOC CONTROLLER & PARTS <<

It's been over five years since reproduction roller controllers for Major Havoc have been available.  Our reproduction model is based on the well known design made available by James Marous in the year 2000.  We offer complete assembled reproduction controllers, translucent rollers, stainless steel shafts, bearings and more.  You can order a complete controller or parts to maintain or upgrade your existing controller.  Most parts, including the translucent roller itself, are interchangeable with earlier reproduction and OEM controllers.  Finally, a real solution for your worn rollers.

>> LUNAR LANDER THRUSTER CONTROLLER & PARTS <<

Released in 1979, Lunar Lander is an extremely old game.  The parts have been unavailable for the thrust controller on this game for at least a good decade or two.  In keeping with the spirit of things around here, we've made a reproduction version of the thrust controller.  Our controller is absolutely 100% interchangeable with the original controller and all of the small components are interchangeable as well.  If you've been dying to get your old Lunar Lander thrust controller restored, this is the place to be!  We've reproduced every single last component needed for this controller, all the way down to the black carriage bolts!  Common failure items on this controller are as follows:  the neoprene stops, the springs, the potentiometer.  It's probably a good idea to swap out that plastic control cover as well.

>> STAR WARS FLIGHT YOKE CONTROLLER & PARTS <<

It's been 24 years since Atari introduced the yoke controller for Star Wars.  It's been well over a decade since Atari last produced parts for this controller and there's been no viable alternative yoke controller marketed until now.  Our reproduction model is based on the original Atari design and is, with a few minor improvements, identical to the original part.  We offer complete assembled reproduction controllers, rubber bumpers, springs, flange bearings, thumb buttons, triggers, shafts, frame pieces, electronic parts and more.  You can order a complete controller or parts to maintain or upgrade your existing controller.  All parts are 100% interchangeable with earlier OEM controllers.  Finally, a real solution for your broken or missing flight yokes!

>> FOOD FIGHT & RED BARON ANALOG JOYSTICK CONTROLLERS & PARTS <<

If you own a Food Fight or Red Baron arcade game, it's most likely that you need parts and you've needed them for many years now!  Released in 1983, Food Fight is one of Atari's more rare games today.  Further, it's an aged game which has been without replacement parts for the better part of two decades.  Our reproduction model is a drop-in replacement for the original (OEM) unit made by Atari.  All of the parts available are 100% compatible with the original joystick unit, so order up and get your game running smoothly again!  In case you're not sure which parts commonly fail, be sure to look at the pivot balls, housing, gimbals, bellows and linkages.

>> 720 DEGREES JOYSTICK CONTROLLER & PARTS <<

Chances are, if you own a 720, you need parts...and you've needed them for quite some time!  Released 22 years ago, 720 Degrees is an aged game which has been without replacement parts for many, many years.  Our reproduction model is a drop-in replacement for the original (OEM) unit made by Atari.  All of the parts available are 100% compatible with the original joystick unit, so order up and get your game running smoothly again!  In case you're not sure which parts commonly fail, be sure to look at the pivot balls and the optic boards.

>> TEMPEST SPINNER CONTROLLER & PARTS <<

One of the older classics, Tempest was released in 1980 as one of the first color vector games by Atari.  The controller used for this game was a basic spinner mechanism.  Luckily, these controllers were built fairly well, so the need for replacement parts has been minimal throughout the years, except for physically damaged encoder wheels, dead encoder boards and new polymer bearings.  It's been well over a decade since Atari last produced parts for this controller and there's no viable alternative drop-in replacement spinner marketed today.  Our reproduction model is based on the original Atari design and is, with only one MAJOR improvement, identical to the original part.  We offer complete assembled reproduction controllers, shafts, polymer bearings, frames, knobs, encoder wheels and more.  You can order a complete controller or parts to maintain or upgrade your existing controller.  All parts (except for R4 ball bearings and pillow blocks) are 100% interchangeable with earlier OEM controllers.  Finally, a real solution for your broken or missing Tempest spinners!

>> HALL EFFECT JOYSTICK CONTROLLER & PARTS <<

The last year that Atari made the Hall Effect joystick was sometime around 1990, so it's been awhile.  The parts have been mostly unavailable for over a decade, with the exception of a few NOS parts here and there.  Our reproduction model is a drop-in replacement for the original (OEM) unit made by Atari.  All of the parts available are 100% compatible with the original joystick unit, so order up and get your game running smoothly again!  In case you're not sure which parts commonly fail, be sure to look at the pivot balls and the optic boards.

>> MISSILE COMMAND TRAK-BALL CONTROLLER & PARTS <<

Finally, a source for Missile Command trak-balls.  Chances are that if you own a Missile command upright or Cockpit model, your trak-ball has worn to the point where replacement has become a necessity.  We've got you covered.  Additionally, we have a reproduction 2.25" white trak-ball (commonly used in centipede) and 2.25" as well as 3" trak-ball roller kits.

>> ATARI BUTTONS & BUTTON CONES <<

If you own an Atari made arcade game from the 70's or 80's, chances are that you could use some of these.  We have a full selection of aluminum-made cones which are far superior to the plastic (cost cutting) cones used by Atari in their later years.  We also have a full selection of matching switches for these cones, both red LED and non-LED versions.  Our switches are NOS (new old stock) and in brand new condition.

>> ASSAULT JOYSTICK CONTROLLER & PARTS <<

If you've ever played this game, then it's very likely that you've witnessed a failing controller.  This is very common with this game.  Generally, you'd want to change out the plunger and the pivot ball for starters.  Those are the two most common failure points with these controllers.  Our reproduction model is a 100% compatible drop-in replacement for the original.  All of the parts are fully interchangeable, too.  So, you can finally restore those old controllers and get to the important stuff - playing your game! 

>> BATTLEZONE JOYSTICK CONTROLLER & PARTS <<

After roughly two decades of parts being unavailable for Battlezone, the wait is finally over with!  It's very likely that during this time you've witnessed a failing controller on every Battlezone game you've come in contact with.  Failure points of this controller include but are not limited to the pivot ball and centering bellows.  These are the two most common failure points with these controllers.  Our reproduction model is a 100% compatible drop-in replacement for the original.  All of the parts are fully interchangeable, too. 

>> PAPERBOY CONTROLLER & PARTS <<

It really doesn't seem like that long ago, but it's been over 25 years since Paperboy was originally released into the arcades!  During the majority of this time, many of the parts for this game (especially the controller) have been simply unavailable.  Sadly, many Star Wars yokes became donors to provide essential parts to keep the Paperboy controllers maintained throughout the years.  That's about to change!  After more than a decade of parts being unavailable for Paperboy, the wait is over!  Failure points of this controller are many, but there are a few critical failures of note:  The actual steering frame (Atari seems to have released their OEM controllers with this part missing the welds!), the grips and the potentiometers.  Our reproduction model is a 100% compatible drop-in replacement for the original.  All of the parts are fully interchangeable, too.